Teflon Bearing Plate

Carbon filled teflon ptfe fluorogold recessed slide bearings the slide bearing as differentiated from bridge bearings elastomeric bearings and other typical expansion bearings transmits a vertical load from a supported structure to the sub structure while providing for controlled horizontal movement.

Teflon bearing plate.

The assembly is designed to ensure that the ptfe pad. Piping technology products supplies slide bearing plates for a variety of applications including support of piping heavy equipment such as pressure vessels and structural steel members. Load capacity reinforced ptfe. 50 mpa 510 kg.

This method will prevent damage to the ptfe 25 glass filled. Top sliding plate 3mm thick polished stainless steel plate. Fluorogold slide bearings are made from a special formulation of ptfe teflon that is re informed with a glass fiber aggregate. Ptfe slide bearings crossflon skidway systems are used to aid the skidding of topsides jackets and other heavy fabrications.

Also stand alone slide bearing sandwich plates fig no slb 90 are available as shown on page 152. With a 1 2 wide lip the steel backing plate can be stitch welded or seal welded as desired. We offer a range of crossflon skidway plates to suit customers individual requirements. Type tf2 tri slide slide plates consist of two 2 ptfe plate pads bonded to backing plates with a lip all the away around the ptfe plates.

Bottom sliding plate 4mm thick reinforced ptfe virgin ptfe bonded into a 2mm deep recess in a 6mm thick carbon steel plate stainless steel plate. The plates provide a surface with a low coefficient of friction which can be attached to a supporting structure. Ptfe slide bearing recessed typical assembly. 4 0 bearing assemblies carpenter paterson slide bearings consist of a single ptfe pad counterfaced with a polished stainless steel plate.

Method of installation tack welding full welding bolting mortar embedment. A full weld will help prevent seepage of water between the slide bearing plate and the support structure avoid overheating which may destroy the bonding of the ptfe 25 glass filled to the base plate. A structure weighing in excess of 47 000 tonnes has been successfully loaded out on a crossflon skidway system. Fabreeka ptfe pads are installed as well to accommodate construction irregularities such as rotation and non parallel load bearing surfaces while each teflon pad also provides a sliding surface to accommodate expansion.