Synthetic Winch Rope Repair

Here is mine attached to the front bumper.

Synthetic winch rope repair.

Reason two is due to snatching or towing. Cut the rope from the broken or worn out point keeping the scissor at a 45 angle. Remove the old winch line from the spoolstep 6. Get the tools and supplies you needstep 2.

If a winch line breaks this is the tool to properly fix it to retain the same strength and safety as before the break. This should never be done with winch lines steel or synthetic because they do not stretch and cannot hold up to the shock. Remove your factory warn hook. Synthetic winch rope repair splicing end to end.

Synthetic winch lines break for 3 reasons. Here is the warn hook completely removed. Dyneema 10mm synthetic winch rope are replacing steel wire in many varied applications. Page contents step 1.

What to repair broken synthetic winch rope. Just pop the cotter pin out remove the load bearing pin and the warn hook is free from the black metal part currently covering the rope. Most commonly they get abraded or cut minimizing the strength relative to the cut or abrasion. Among these new applications is wire rope replacement on winches.

Here are the required tools 1. They are stronger then conventional wire ropes weight for weight dyneema is 15 times stronger than steel. Disengage the winch motorstep 5. The rope will split into two pieces.